PKS PKSC65 Scissor Lift Series

Select your model

Choose the exact SKU. Accessories and installation options are model-specific and confirmed with the quote.

Available accessories and options

Optional accessories and configuration options are available by quote and are sold separately unless the selected lift explicitly includes them. Add the lift to your quote cart and note the accessory SKUs you need; we will confirm fitment, quantities and pricing in your Service Fusion quote.

Available accessories: air-hydraulic rolling bridge jacks

PKA-15JBL / PKA-20JBL / PKA-25JBL / PKA-30JBL / PKA-35JBL / PKA-40JBL are rolling bridge jacks rated at 15,000 / 20,000 / 25,000 / 30,000 / 35,000 / 40,000 lb. They include a load-holding device, pickup adapters and additional height adapters. Request the appropriate jack for your axle load and runway track; fitment and lift capacity are confirmed before inclusion.

Related service option: custom pit jacks

PKA-PJBL30 (30,000 lb) and PKA-PJBL40 (40,000 lb) are rolling pit jacks customized to a new or existing service pit. These are pit-work options and are not listed as runway-mounted accessories for this lift. Provide pit dimensions for a separate fitment review and quote.

Available option: runway air lines

PKA-ALK adds air lines and bulkhead fittings inside the runways for bridge jacks and air tools. This factory option is available only at the time of the lift order; request it with the lift quote.

Available accessory: bridge-jack bus adapter

PKA-BUSA is the bus adapter for JB / JBL-style rolling bridge jacks. It permits wider vehicle frame pickup over the runways. Request it with a compatible bridge jack and confirmed vehicle frame points.

Available accessories: alignment recesses and radius plates

PKA-SRAP provides alignment recesses with slip plates; radius plates are separate and the vehicle wheelbase range is required. PKA-TPCU-MD / PKA-TPCU-HD provide medium-duty / heavy-duty turnplate recesses without turnplates. PKA-MDRP is a pair of 7,500 lb-per-plate stainless radius plates (15 × 15 × 1.5 in); PKA-HDRP is a pair of 15,000 lb-per-plate radius plates (18 × 18 × 2.5 in). Match recesses, plate ratings and dimensions to the selected lift and vehicle during quoting.

Available options: runway width

PKA-30WIDE / PKA-36WIDE increase a 24 in runway to 30 in / 36 in, specified by runway length. Request these only when the selected lift's base runway is 24 in; wider standard runways require a model-specific review.

Available accessories: drive-through and low-clearance ramps

For PKSC50–PKSC80 scissor lifts, PKA-DTRHDSC is the drive-through ramp set. PKA-EXTRHDSC-01 upgrades the original ramps to 120 in fixed extended ramps for low-clearance vehicles. PKA-EXTRHDSC-02 supplies a separate pair for replacement or drive-through use. Confirm surface-mounted versus recessed installation and specify the intended use.

Available accessories: LED runway lighting

PKA-LK2 / PKA-LK3 / PKA-LK4 are 12V factory-installed lighting kits with two / three / four lights per runway, available only with a new lift order. PKA-LK2-RF / PKA-LK3-RF / PKA-LK4-RF are the corresponding 12/24V retrofit kits for existing PKS lifts. Advise the existing lift voltage and selected runway length when requesting a retrofit kit.

Available accessory: oil drain pan

PKA-OD is the 32-gallon oil drain pan listed with PKS's four-post and scissor lift options. Runway clearance, positioning and the intended service application are confirmed with the quote.

Model configuration

Heavy Duty Scissor Lift with 8 Main Cylinders & 4 Aux Cylinders. The Lift is PLC Controlled & Equalized. One Set of Ramps & Transitions.

Facility planning

Verify vehicle loads, facility clearance, floor or foundation, electrical supply and installation requirements against the selected model documentation.