PKS PKMC-30-PC Mobile Column Lift Series

Select your model

Choose the exact SKU. Accessories and installation options are model-specific and confirmed with the quote.

Available accessories and options

Optional accessories and configuration options are available by quote and are sold separately unless the selected lift explicitly includes them. Add the lift to your quote cart and note the accessory SKUs you need; we will confirm fitment, quantities and pricing in your Service Fusion quote.

Available accessory: bumper / frame lifting adapter

PKA-BA is offered for mid-rise and mobile column lifts, sold as a set per column. It permits lifting from approved front or rear frame points instead of the tires. Column, adapter and vehicle compatibility must be confirmed for the selected configuration.

Available accessory: approximate weight gauge

PKA-WG is an analogue gauge for an approximate indication of the vehicle weight on the lift. It is an optional mobile lift accessory; hydraulic and gauge compatibility is confirmed for the selected configuration. An approximate reading does not replace verified vehicle and axle weights.

Available accessory: snow plow wing adapter

PKA-SPA is the snow plow wing adapter in PKS's mobile lift accessory range. Request application and column fitment confirmation with the quote.

Available accessory: remote pendant

PKA-RCMC is an Up / Down / Emergency Stop pendant for electrical mobile column lifts. Connector and control-system compatibility are confirmed for the exact selected configuration.

Available accessories: PC communication and power cables

PKA-PCCOM is a 35 ft PC communication assembly with two 16-pin connectors; PKA-PCCOMX supplies communication cable by the foot. PKA-PCPWR is a 40 ft hard-wired PC power cable and PKA-PCPWRX supplies it by the foot. These cable options are listed for PC controls; they are not listed as battery-operated BO power-cable options.

Available accessory: fork reducer sleeves

PKA-FRS supplies reducer sleeves per column for non-adjustable PKMC30 / PKMC40 forks when accommodating smaller wheel diameters. Wheel and column fitment are confirmed with the quote.

Available accessories: vehicle support stands

Support stands are offered in 18,000 lb (PKA-1830-18 / PKA-3047-18 / PKA-4775-18), 24,000 lb (PKA-1830-24 / PKA-3047-24 / PKA-4775-24) and 30,000 lb (PKA-1830-30 / PKA-3047-30 / PKA-4775-30) ratings. The SKU prefixes indicate 18–30 in, 30–47 in or 47–75 in height ranges. The 18-ton range is PKA-1830-18T / PKA-3047-18T / PKA-4775-18T / PKA-5480-18T, with the last model covering 54–80 in. Select the stand rating, support points and height for the vehicle and load; a lift's total capacity does not establish a stand's allowable load.

Available by request: mobile rail configurations

For rail applications, request a custom PKMRL configuration with your lift inquiry: PKMRL-18-4, PKMRL-24-4, PKMRL-30-4, PKMRL-40-4 or PKMRL-70-4 (four rail columns with PLC / PC operation), or PKMRL-18-4-BO / PKMRL-24-4-BO (24V battery-powered rail configurations with PC controls). These are purpose-designed rail lift configurations, not retrofit attachments for a standard PKMC road-vehicle lift. PKS must confirm the rail application and engineering requirements before quoting.

Model configuration

Four 30,000 lb. Capacity Mobile Columns With: PC Controls (2 Primary, 2 Secondary) Carriages Fitted w/ UHMW Sliding Blocks Lift Operates as a Synchronized Set, One Pair, Two Pairs or Single Column Mode.

Facility planning

Verify vehicle loads, facility clearance, floor or foundation, electrical supply and installation requirements against the selected model documentation.