PKS PKMC-12-BO Mobile Column Lift Series

Select your model

Choose the exact SKU. Accessories and installation options are model-specific and confirmed with the quote.

Available accessories and options

Optional accessories and configuration options are available by quote and are sold separately unless the selected lift explicitly includes them. Add the lift to your quote cart and note the accessory SKUs you need; we will confirm fitment, quantities and pricing in your Service Fusion quote.

Available accessory: bumper / frame lifting adapter

PKA-BA is offered for mid-rise and mobile column lifts, sold as a set per column. It permits lifting from approved front or rear frame points instead of the tires. Column, adapter and vehicle compatibility must be confirmed for the selected configuration.

Available accessories: chassis lifting beam

PKA-CLB12 is the 24,000 lb capacity chassis lifting beam listed for PKMC-12-4 / PKMC-12-6 sets, used between front and rear columns. PKA-CLBADP12 is a pair of 12 in adapters for the beam. Request these for the matching standard PKMC-12 configuration; compatibility with E, EA, PC or BO versions must be confirmed with PKS before inclusion.

Available accessory: approximate weight gauge

PKA-WG is an analogue gauge for an approximate indication of the vehicle weight on the lift. It is an optional mobile lift accessory; hydraulic and gauge compatibility is confirmed for the selected configuration. An approximate reading does not replace verified vehicle and axle weights.

Available accessory: forklift pad adapter

PKA-FLA-12 is listed for the PKMC-12-2 configuration and includes a set of forklift pads and two ramps. A third-wheel ramp is sold separately. Request it only for the matching two-column set; compatibility with E, EA, PC or BO versions must be confirmed.

Available accessory: truck frame adapters

PKA-TFA-12 is a set of two truck frame adapters listed for PKMC12 lifts, with 6,000 lb total adapter-set capacity. The vehicle frame points and the exact lift configuration are confirmed with the quote; use the adapter's capacity limit for the supported load.

Available accessory: snow plow wing adapter

PKA-SPA is the snow plow wing adapter in PKS's mobile lift accessory range. Request application and column fitment confirmation with the quote.

Available accessory: remote pendant

PKA-RCMC is an Up / Down / Emergency Stop pendant for electrical mobile column lifts. Connector and control-system compatibility are confirmed for the exact selected configuration.

Available accessories: vehicle support stands

Support stands are offered in 18,000 lb (PKA-1830-18 / PKA-3047-18 / PKA-4775-18), 24,000 lb (PKA-1830-24 / PKA-3047-24 / PKA-4775-24) and 30,000 lb (PKA-1830-30 / PKA-3047-30 / PKA-4775-30) ratings. The SKU prefixes indicate 18–30 in, 30–47 in or 47–75 in height ranges. The 18-ton range is PKA-1830-18T / PKA-3047-18T / PKA-4775-18T / PKA-5480-18T, with the last model covering 54–80 in. Select the stand rating, support points and height for the vehicle and load; a lift's total capacity does not establish a stand's allowable load.

Available by request: mobile rail configurations

For rail applications, request a custom PKMRL configuration with your lift inquiry: PKMRL-18-4, PKMRL-24-4, PKMRL-30-4, PKMRL-40-4 or PKMRL-70-4 (four rail columns with PLC / PC operation), or PKMRL-18-4-BO / PKMRL-24-4-BO (24V battery-powered rail configurations with PC controls). These are purpose-designed rail lift configurations, not retrofit attachments for a standard PKMC road-vehicle lift. PKS must confirm the rail application and engineering requirements before quoting.

Model configuration

Two 12,000 lb. Capacity Mobile Columns With: Battery Operated (24V DC), PC Controls PC Controls (1 Primary, 1 Secondary) Carriages Fitted w/ 4" Steel Roller Bearings & Heavy Duty 7/8'' Fork Lift Channel Column. Lift Operates as a Synchronized Set or Single Column Mode. 12'' Fork Lengths.

Facility planning

Verify vehicle loads, facility clearance, floor or foundation, electrical supply and installation requirements against the selected model documentation.